E-64-G-0500 Polyethylene Tubing
Product Info
PE tubing is produced from a high molecular weight resin to provide increased dimensional stability, uniformity and long-term strength. Parker PE tubing meets the FDA and NSF-51 requirements for food contact applications and NSF-61 for potable water.
The tubing may be used in general-purpose instrument applications as well as all food handling applications except holding food during cooking. The black tubing, EB series, contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high, ultraviolet light sources.
Standard black is not approved for food handling applications, but NSF-listed and FDA-compliant black can be ordered on special request. A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur.
Features
- Made from 100% virgin resin material for long term strength
- ASTM D-1693 (10% IGEPAL) For excellent stress crack resistance maximizes the service life
- UV stabilized to reduce fading, cracking and loss of strength from sunlight
- Meets FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water
Item Specifications
-
Potable Water, Beverage Dispensers, Chemical Transfer, Low Pressure Pneumatics
-
FDA, ASTM D-1693 (10% IGEPAL), ASTM D-1248, Type I, Class A, Category 4, Grade E5, NSF – 51, NSF – 61
-
Green
-
Dubl-Barb®, Prestomatic, SAE Cartridges, Flow Controls, Prestolok®, Liquifit, TrueSeal™, Compression, Compress-Align®, Poly-Tite, Fast & Tite®, Hi-Duty
-
150 °F, 66 °C
-
125 psi, 0.86 MPa, 8.6 bar
-
Air, Water (Potable Water), Water
-
-80 °F, -62 °C
-
1-1/4 Inch, 31.8 mm
-
500 psi, 34.5 bar
-
3/8 Inch
-
FDA, FDA 21 CFR 177, ASTM D1248, NSF 51, ASTM D1693, NSF 61
-
500 ft
-
0.25 Inch, 6.4 mm
-
Polyethylene (PE)
-
9.5 mm, 3/8 Inch
-
Instr. Grade, Fractional
-
0.025 lb/ft, 0.037 kg/m