Auster Rubber >> Water Hose
USRUBBER005

butHome

butRubberServices

butRubberSpecials

butExpansion

butBumpers

butHose

butProtective

butFitting1

butSpongePack1

butPlow1

butPlow1

Adhesive & Laminates

Adhesive & Laminates

Adhesive & Laminates

Water Hose... A foot or a Mile!

waterhose01

Flexiwall Water Suction Hose

Application: Premium-grade. Crush-proof water suction hose, light weight, and extremely flexible even in large sizes Contains no wire helix which can be flattened causing hose failure Will recover its shape after being accidentally crushed or kinked Particularly suited to rough mining and construction work. Especially in situations where conventional hose fails due to crushing.

Construction: Oriented directed fiber, located in the wall, act to stiffen when suction is applied. Homogeneous wall eliminates tube separation. Suction Rating Full vacuum as water hose. Working Pressure.' 115 psi.

l.D. (in.): 1- to 6.

waterhose02

Rubber Water Suction Hose

Application: General-purpose wafer suction hose for contractors industrial, and agricultural service.

Construction: Smooth rubber tube. Fabric piles or braid and Spiral wire reinforcement. Good quality. black rubber cover.

l.D. (in.): 1 to 8

waterhose03

Flex-PVC Green Suction Hose

Application: Water suction and discharge hose for construction, agricultural, mining, fishing, and marine industries. for the transfer of slurry, gravel, and other small-particle solids, and for some chemical-transfer use temperature range. 23F to 150F.

Construction: An all plastic flexible PVC hose, reinforced by a spiral made of rigid PVC which is inseparably fused into soft wall of hose.

l.D. (in.): 1 to 4.

waterhose04

SUPERFLEX JETTING HOSE

Application: Premium grade hose for high-pressure applications It is lighter and has greater flexibility, than the conventional letting hose.

Construction Oil-resistant tubes Reinforced with mandrel braided plies of nylon cord Abrasion and weather resistant cover.

l.D. (in.): 1-1/2 to 4

Max. WP Up to 1000 psi.

waterhose05

PAPER MILL HOSE

Application: Wash-down service in paper mills.

Construction: Heat-resistant rubber tube. Synthetic fabric plies. Heavy neoprene cover, resistant to abrasion, acids and chemicals. Ends capped to protect the carcass. Plain ends or with built-on duck and rubber nozzle one end.

I.D. (in.): 3/4 to 1-1/2.

waterhose06

CONTRACTORS' WATER HOSE

Application: Good quality, moderate pressure water discharge hose for contractors and industrial use.

Construction: Smooth rubber lube. Reinforced with rayon cord. Smooth black rubber cover.

I.D. (in.): 1/2 to 3/4

waterhose07

HEAVY DUTY WATER DISCHARGE HOSE

Application Used by contractors and industrial plants for general water discharge service.

Construction: High quality rubber tube Specially treated synthetic fabric reinforcement is lighter than cotton reducing weight and OD dimensions. yet equal in strength Abrasion-resistant rubber cover Available in 2 or 4 ply.

l.D. (in.): 3/4-to 6.

waterhose08

ROLL FLAT PVC WATER DISCHARGE HOSE

Application: Moderate pressure water discharge service, strong, extremely light-weight, sunlight and abrasion resistant. Will also withstand effects of oils, grease, acids and many chemicals. Rolls up flat for easy storage.

Construction: Close woven polyester jacket completely impregnated with polyvinyl chioride. Mildew and rot resistant.

I.D. (in.): 1-1/2 to 8.

waterhose09

SINGLE AND DOUBLE JACKET FIRE HOSE

Construction: Single and double jacket polyester filler cotton (or polyester) warp. Rubber-lined fire hose made to the exact specifications of the National Board of Fire Underwriters. Mildew treatment available Pressures to 800 test.

I.D. (in.): 1-1/2 to 3.

waterhose10

SINGLE JACKET MILL

Application: For discharge service in mills, mill yards, mines quarries, and other excavations.

Construction: Heavy-duty 1 00% polyester, rubber lined light weight, extremely flexible.

I.D. (in.): 1-1/2 to 6.

waterhose11

ROLL FLAT PVC WATER DISCHARGE HOSE

Application: Moderate pressure water discharge service, strong, extremely light-weight, sunlight and abrasion resistant. Will also withstand effects of oils, grease, acids and many chemicals. Rolls up flat for easy storage.

Construction: Close woven polyester jacket completely impregnated with polyvinyl chioride. Mildew and rot resistant.

I.D. (in.): 1-1/2 to 8..

waterhose12

WRAPPED CREAMERY HOSE

Application: Sturdy pressure steam and hot water hose for wash-down service in dairies, meatpacking houses, and food processing plants. Will take up to 40 lbs. saturated steam pressure.

Construction: Heat resistant rubber tube. Reinforced with heavy cotton duck plies. Sanitary white neoprene cover resistant to animal fats, oils and acetic fruit acids.

I.D. (in.): to 1.

If it's made of rubber, we have it... if we don't, we'll make it!

Auster Rubber Co. Inc.

item4

238-A N. 9th Street, Brooklyn, New York 11211

Brooklyn • 718.782.6400 • Fax: 718.782.8788

Email: info@austerrubberco.comwww.austerrubber.com

USRUBBER002a1a1a
butContactUs
 

butSubCapabilities1

 

butSubMaterials1

 

butSubProducts1

 

butSubPoductSpecs1

 

butSubOverview1

 

butSubBumpers1

 

sButAir

 

sButChemical

 

sButFoodHandling

 

sButHydraulic

 

sButMaterialHandling

 

sButPetroleum

 

sButSpecialPurpose

 

sButWater

 

sButGloves1

 

sButBoots1

 

sButRain1

 

sButGloves1a

 

sButBoots1a

 

sButRain1a